Menu

Waterbased Inks

SIVK

Clear glossy self-adhesive PVC film with paper backing. Suitable for labels, posters, displays and exhibition panels. SIVK is also suitable for glass decoration and shop window graphic advertising or as backlit applied directly on light diffusion boards.

Printing Systems



Rolls

Art. NumberWidth (mm)ThicknessLength (m)
22VK0.100.340004300.110 mm20PDF
22VK0.100.359006100.110 mm20PDF
22VK0.100.390009140.110 mm20PDF
22VK0.100.3050010670.110 mm20PDF
22VK0.100.3200012700.110 mm20PDF
22VK0.100.3330013700.110 mm20PDF

Technical data

Characteristic

  • High brillance of colours
  • Adhesive light
  • Universal use

Finish

  • Clear glossy
  • self-adhesive with paper backing

Specifications

Release linersiliconized paper ~ 0.145 mm
Coating PrintsidePower-Gloss®, clear glossy
Width (mm)1270
Thickness base material with toner coating0.110 mm
Core Diameter76 mm
Adhesion strength~ 3.5.N / 25 mm (A.F.E.R.A.), after 24 h ~ 10 N / 25 mm (A.F.E.R.A.)
Type of adhesivepolyacrylate dispersion, semipermanent
Length (m)20
Base Materialcalendered monomeric plasticized PVC, 0.100 mm
Total thickness0.260 mm
Packing quantity 1 roll

Compatibility

  • Suitable for most Ink Jet plotters using dye- or pigmented inks

Handling

  • Printing: The film surface of the SIVK is treated with a swellable coating. We recommend the use of "photo black ink", which is more smudge-proof than "matt black ink". When printing with high ink application, depending on the printer / inks used, extended drying time and reduced smudge resistance may occur.
    It is therefore essential to determine the appropriate printer settings by means of test prints prior to the production run.
  • Laminating: The printed surface must be protected with foils for cold lamination if it is subject to humidity, sweaty hands, abrasion or any other influences. For a short term outdoor use, SIVK must always be protected with a 5mm overlapping lamination.
  • Gluing: SIVK will stick to any solid, smooth surfaces which are dry and free of dirt, grease, silicon etc. Before gluing it is absolutely necessary to check that the surface is appropriate to this aim and that it has been prepared (cleaned) professionally. During gluing the temperature must reach at least 15°C. You can remove SIVK by heating the film’s surface with a hot air gun. Then pull it off carefully.

Storage

  • Shelf life: 1 year after delivery
  • After printing the remaining roll must be removed from the plotter and stored in its closed original packing in a cool and dry environment.

Downloads (PDF)