REGUpac RCS2

Application:

Paint masks, cut by plotters or manually, for solvent based or water
based laquers, for use on even surfaces like:
Painted metal, tarpaulin, foam boards and other plastic boards, wood,
glass, and many other surfaces.

Properties:

• High precision edges
• Simple weeding of small and large characters
• Accepts writing with ball-point pen or pencil
• Perfect adhesion on the above mentioned surfaces
• No curl of the open edges with aqueous or solvent based laquers
• Precise edges even after long drying time
• Multiple layers of paint possible
• Can be removed without residues

High grade, elastic stencil paper for paint masks,
self-adhesive, with siliconized release liner.

Preparation:

The surfaces must be dry and free of dust, grease, silicone or other
impurities which could influence the adhesion of the mask or the paint.

Temperatures:
The temperature during the application must reach at least 15°C.

Cutting:
The best pressure of the knife is reached, if fine details are easy to weed
and the release liner is not cut.

Weeding:
The positive parts of the mask are removed with tweezers, a needle, a
knife or any other suitable tool.

Mounting:
A medium tack application tape (film or paper) should be used for
mounting.

Laquering:
With a brush or a roller or by air brush, in multiple layers if required.
To achieve a good painting it is important to work thoroughly and to
choose the right degree of dilution of the paint as well as a paint thinner
adapted for the application. For this reason the recommendations of the
paint manufactuer must be observed imperatively.

Removing:
The paint mask can only be removed after sufficient drying of the paint.

• Store in a cool and dry place