Waterbased Inks


Highly white matt self-adhesive PP film with paper backing. Suitable for labels, displays, exhibition panels, construction boards, signboards and for shop-window designs.

Printing Systems


Art. NumberWidth (mm)ThicknessLength (m)
38PMR.060.392009140.100 mm30PDF
38PMR.060.3070010670.100 mm30PDF

Technical data


  • High brillance of colours
  • Inkjet coating and adhesive for the indirect food contact ISEGA / FDA-certified
  • Can be laminated right to the edges
  • Low-reflective printing surface
  • Adhesive light
  • Universal use
  • Removable


  • self-adhesive with paper backing
  • White matt


Release linersiliconized paper ~ 0.055 mm
Coating Printsidemicroporous coating
Width (mm)914
Thickness base material with toner coating0.100 mm
Core Diameter76 mm
Adhesion strength~ 6 N / 25 mm (A.F.E.R.A)
Type of adhesiveacrylate dispersion removable
Length (m)30
Base MaterialPolypropylene, 0.060mm
Total thickness0.170 mm
Packing quantity 1 roll


  • Suitable for most Ink Jet plotters using dye- or pigmented inks


  • Gluing: The film will stick to any plane and smooth surfaces which are dry and free of dirt, grease, silicon etc. Before gluing it is absolutely necessary to check that the surface is appropriate to this aim and that it has been prepared (cleaned) professionally. During gluing the temperature must reach at least 15°C.
  • Air infiltration after printing can be avoided if the prints are transported and stored tightly rolled up on a cardboard sleeve
  • If dye inks are used, must be laminated indoor and outdoor to improve light-fastness and smudge-proofness.
  • It is necessary to protect the surface if it is subject over a long time to abrasion or any other mechanical influences, to dirt or humidity. The lamination can be done right to the edges or over the edges. The user should check before using what is more appropriate.
  • We recommend to use self-adhesive laminating foils for cold lamination.


  • Shelf life: 1 year after delivery
  • After printing the remaining roll must be removed from the plotter and stored in its closed original packing in a cool and dry environment.

Downloads (PDF)