Waterbased Inks
Folajet Backlit
Folajet Backlit is a single matt coated polyester film for photorealistic prints to be displayed in backlit frames and advertisement panels. Recomended for indoor use, front & back print compatible.
Printing Systems
Rolls
| Art. Number | Width (mm) | Length (m) | Nominal thickness (mm) |
|---|
| 20146.125.39200 | 0.125 | 914 | 30 |  |
Technical data
Characteristic
- Brilliant, true colour reproduction with or without back lighting
- Suitable for dye inks
- Can be used in front and back print mode (right reading resp. mirror prints)
- Suitable for piezo Ink Jet printer
- Suitable for pigment inks which offers improved light stability
- Suitable for thermal Ink Jet printer
- Good ink absorption
- Super sharp edge definition
- High whiteness for excellent contrast
- Fast dry
Specifications
| Coating Printside | Ink Jet |
| Width (inch) | 36 |
| Width (mm) | 914 |
| Printside | Matt side |
| Length (ft) | 98.43 |
| Length (m) | 30 |
| Nominal thickness (mil) | 5 |
| Nominal thickness (mm) | 0.125 |
| Backside | Glossy side |
| Base Material | Polyester film |
| Packing quantity | 1 roll |
Compatibility
- Suitable for most Ink Jet plotters using dye- or pigmented inks
Handling
- Between 15-30°C and 30-70% r.h.
- Printer Mode: photo quality, coated paper, o.e.
- A preconditioning period of 24 hours within the printing environment is recommended.
- For Outdoor Use, laminating is recommended.
- Ink Load: approx. 260 - 300% (may vary according to ink system and RIP calibration).
- Lamination :cold or heat lamination. For outdoor application lamination is recommended. Before laminationg let the prints dry for minimum 2 hours.
Storage
- Once packaging is opened, store at a room temperature of 15 - 25°C and at a humidity of 30 - 60 %
- Shelf life 1 year after delivery (under above storage conditions)
Downloads (PDF)
