Menu

Waterbased Inks

SI 165

Highly white matt polyester film with silver back blockout layer, suitable for pop-up-displays, banner, PoS and exhibition displays.

Printing Systems



Rolls

Art. NumberWidth (mm)ThicknessLength (m)
22165.300.390009140.300 mm20PDF
22165.300.3050010670.300 mm20PDF

Technical data

Characteristic

  • High brillance of colours
  • Good scratch resistance
  • Good flatness
  • High opacity
  • Low-reflective printing surface

Finish

  • White matt

Specifications

Coating Printsidemicroporous coating
Coating Backsidesilverback
Width (mm)914
Thickness0.300 mm
Core Diameter76 mm
Length (m)20
Opacity2.8
Base MaterialPolyester
Packing quantity 1 roll

Compatibility

  • Suitable for most large format Ink Jet printers using waterbased dye, pigment or latex inks

Handling

  • Note for Latex-Inks: To avoid the effect of rewetting (oil film on the print surface due to defective anchorage of ink) it is necessary to establish the optimal drying parameter. This can be done by means of print tests before production print. Rewetting can appear several days after printing when the drying condtions are defective. The rewetting can also be dependent on the given ambient conditions and the composition and consistence of the printing theme. When creating a media profile, this circumstance must be expressly taken into consideration.
  • If dye inks are used, must be laminated indoor and outdoor to improve light-fastness and smudge-proofness.
  • It is necessary to protect the surface if it is subject over a long time to abrasion or any other mechanical influences, to dirt or humidity. The lamination can be done right to the edges or over the edges. The user should check before using what is more appropriate.
  • We recommend to use self-adhesive laminating foils for cold lamination.

Storage

  • Shelf life: 1 year after delivery
  • After printing the remaining roll must be removed from the plotter and stored in its closed original packing in a cool and dry environment.

Downloads (PDF)