Clear Films

Folex Digiprint-IG/PVL

Specially coated polyester film for Electro Ink with a Clear Transparent surface. The film is heat stabilized for good flatness properties and the coating offers excellent ink transfer & bonding for consistent image performance. Paper backing along the long side for smooth feedability.

Cut sheets

Art. Number	Width (mm)	Length (mm)	Nominal thickness (mm)	Packing quantity
06838.100.87500	530	750	0.100	200
06838.130.87500	530	750	0.130	200
06838.180.87400	530	750	0.180	100

Technical data

Characteristic

Superb ink adhesion and image transfer
Easy storage
Excellent dimensional stability
Suitable for short and long runs
Officially approved by HP Indigo test centre
Tear resistant
Consistent performance
Dedicated coating for Indigo Electro Ink
No limited shelf life
Splash resistant

Finish

Clear glossy
Paper backed long side

Specifications

Coating Printside	HP Indigo Electro Ink
Width (inch)	20.87
Width (mm)	530
Printside	Film side
Length (inch)	29.53
Length (mm)	750
Nominal thickness (mil)	4
Nominal thickness (mm)	0.100
Backside	Paperbacked glued long side
Total Thickness (mil)	6.96
Total Thickness (mm)	0.174
Base Material	Polyester film
Packing quantity	200

Compatibility

Suitable for Digital Presses from HP Indigo
Not compatible with dry toner Digital Presses. (See Folex Digiprint-XE and -NX series).

Handling

A preconditioning period of 24 hours within the printing environment is recommended.
Please carefully follow the handling instructions supplied with this product as well as the press manufacturers manual.
No special handling required.
Avoid fingerprints on printing side.

Storage

Shelf life: 1 year after delivery
Store in the closed original packaging in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

Downloads (PDF)

Catalogues

FILMS FOR HP INDIGO - Product line for digital printing (EN) (PDF)
FILMS FOR HP INDIGO - Product line for digital printing (DE) (PDF)