Self-adhering Films
Folex Digiprint-IG/CLSC
Specially coated static cling film for Electro Ink with a clear transparent surface. The film is heat stabilized for good flatness properties and the coating offers excellent ink transfer & bonding for consistent image performance. The film has a silicon release liner which is removed when applying to a window type surface.
Cut sheets
Technical data
Characteristic
- Back layer clings to smooth surfaces (glass, metall) without adhesives, easy to remove
- Superb ink adhesion and image transfer
- Easy storage
- Excellent dimensional stability
- Suitable for short and long runs
- Officially approved by HP Indigo test centre
- Tear resistant
- Consistent performance
- Dedicated coating for Indigo Electro Ink
- No limited shelf life
- Splash resistant
Specifications
Coating Printside | HP Indigo Electro Ink |
Coating Thickness (mil) | 0.48 |
Coating Thickness (mm) | 0.010 |
Width (inch) | 12.6 |
Width (mm) | 320 |
Printside | Special reactive coating for toner, glossy side |
Format | SRA3 |
Length (inch) | 17.72 |
Length (mm) | 450 |
Nominal thickness (mil) | 11 |
Nominal thickness (mm) | 0.275 |
Backside | PVC Cling layer with thin protection sheet |
Total Thickness (mil) | 11.48 |
Total Thickness (mm) | 0.287 |
Base Material | Polyester / PVC Film |
Packing quantity | 100 |
Compatibility
- Suitable for Digital Presses from HP Indigo
- Not compatible with dry toner Digital Presses. (See Folex Digiprint-XE and -NX series).
Handling
- A preconditioning period of 24 hours within the printing environment is recommended.
- Please carefully follow the handling instructions supplied with this product as well as the press manufacturers manual.
- No special handling required.
- Avoid fingerprints on printing side.
Storage
- Shelf life: 1 year after delivery
- Store in the closed original packaging in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.
Downloads (PDF)