Menu

Clear Films

Folex Digiprint-IG/PVK

Specially coated polyester film for Electro Ink with a Clear Transparent surface. The film is heat stabilized for good flatness properties and the coating offers excellent ink transfer & bonding for consistent image performance. Paper backing along the short side for smooth feedability.

Cut sheets

Art. NumberFormatNominal thickness (mm)Packing quantity
06835.100.845002000.100SRA3PDF
06836.130.845002000.130SRA3PDF
06837.180.845002000.180SRA3PDF

Technical data

Characteristic

  • Superb ink adhesion and image transfer
  • Easy storage
  • Excellent dimensional stability
  • Suitable for short and long runs
  • Officially approved by HP Indigo test centre
  • Tear resistant
  • Consistent performance
  • Dedicated coating for Indigo Electro Ink
  • No limited shelf life
  • Splash resistant

Finish

  • Clear glossy
  • Paper backed short side

Specifications

Coating PrintsideHP Indigo Electro Ink
Width (inch)12.6
Width (mm)320
PrintsideFilm side
FormatSRA3
Length (inch)17.72
Length (mm)450
Nominal thickness (mil)4
Nominal thickness (mm)0.100
BacksidePaperbacked short side
Total Thickness (mil)6.96
Total Thickness (mm)0.174
Base MaterialPolyester film
Packing quantity 200

Compatibility

  • Suitable for Digital Presses from HP Indigo
  • Not compatible with dry toner Digital Presses. (See Folex Digiprint-XE and -NX series).

Handling

  • A preconditioning period of 24 hours within the printing environment is recommended.
  • For correct feeding please follow the equipment suppliers manual.
  • No special handling required.
  • Avoid fingerprints on printing side.

Storage

  • Shelf life: 1 year after delivery
  • Store in the closed original packaging in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

Downloads (PDF)