Folarex CAD 2x Matt
This polyester drawing film which has been specially designed for plotter use is characterised by its special surface. The choice of pigments and surface tension for this film in conjunction with the appropriate drawing instruments and inks allow a drawing speed of up to 50 cm/sec without any loss of quality. Ink lines can be removed completely at any time by means of a moistened China ink eraser. Going over the corrected area again with a pencil eraser will produce a surface that can also be drawn manually. Even areas that have been corrected several times can be re-drawn immediately. The anti static coating prevents the film accepting an electrostatic charge, in particular when using plotters or paper mover plotters. The accumulation of dust which clogs up ink drawing instruments and causes technical failures is therefore prevented. In addition adjacent films no longer stick together. The high level of UV and visual transparency ensures clean, rapid and true prints. Copies rich in contrast can also be produced with an incident light source (large format copier/microfilm).
- Excellent runnability
- Good flatness
- Heat resistant
- High visual contrast
|Coating Printside||Technical Bureau|
|Printside||Identical on both sides|
|Total Thickness (mm)||90|
|Base Material||Polyester film|
- For use on most Pen Plotters.
- For correct feeding please follow the equipment suppliers manual.
- Avoid moisture and fingerprints.
- Once packaging is opened, store at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.
- Store in a cool and dry place