Signolit SIVK

Clear vinyl calandered, monomeric removable acrylic adhesive film. Ideal for stickers, signs, decals and mock-ups. It sticks to most clean surfaces.

Art. Number	Thickness	Format	Packing quantity
22VK0.100.44000	0.110 mm	DIN A4	100 sheets
22VK0.100.44700	0.110 mm	DIN A4	250 sheets
22VK0.100.43100	0.110 mm	DIN A3	40 sheets

Release liner	siliconized paper ~ 0.145 mm
Coating Printside	Power-Gloss®, clear glossy
Width (mm)	210
Thickness base material with toner coating	0.110 mm
Format	DIN A4
Adhesion strength	>/= 3.5 N, after 24 h >/= 10 N
Type of adhesive	polyacrylate dispersion, semipermanent
Length (mm)	297
Base Material	calendered monomeric plasticized PVC, 0.100 mm
Total thickness	0.260 mm
Packing quantity	100 sheets

For use on most Small Format Ink Jet Printers such as: HP, Canon, Epson, Apple, Digital, Kodak, Lexmark, Olivetti, Tektronix, Xerox, etc.

Printing: The film surface of the SIVK is treated with a swellable coating. We recommend the use of "photo black ink", which is more smudge-proof than "matt black ink". When printing with high ink application, depending on the printer / inks used, extended drying time and reduced smudge resistance may occur.
It is therefore essential to determine the appropriate printer settings by means of test prints prior to the production run.
Laminating: The printed surface must be protected with foils for cold lamination if it is subject to humidity, sweaty hands, abrasion or any other influences. For a short term outdoor use, SIVK must always be protected with a 5mm overlapping lamination.
Gluing: SIVK will stick to any solid, smooth surfaces which are dry and free of dirt, grease, silicon etc. Before gluing it is absolutely necessary to check that the surface is appropriate to this aim and that it has been prepared (cleaned) professionally. During gluing the temperature must reach at least 15°C. You can remove SIVK by heating the film’s surface with a hot air gun. Then pull it off carefully.