OHP / Clear Films
BG-71.1
A crystal clear film, for Colour Laser Printers using low fusing temperature toners. Ideally suited for overhead projection transparencies or see through overlays. The film uses the same universal coating on both sides, eliminating any confusion when inserting sheets into the feed tray.
Printing Systems
Cut sheets
| Art. Number | Format | Nominal thickness (mm) | Packing quantity |
|---|
| 29711.100.84500 | SRA3 | 0.100 | 200 |  |
Technical data
Characteristic
- True colour
- For machines equipped with optical sensors
- Excellent runnability
- Good flatness
- Excellent toner bonding
- Heat resistant
- Highly universal
Finish
- Clear transparent
- Paper backed short side
Specifications
| Coating Printside | Laser & Copier colour |
| Width (inch) | 12.6 |
| Width (mm) | 320 |
| Printside | Special coating for toner |
| Format | SRA3 |
| Length (inch) | 17.72 |
| Length (mm) | 450 |
| Nominal thickness (mil) | 4 |
| Nominal thickness (mm) | 0.100 |
| Backside | Paperbacked short side |
| Base Material | Polyester film |
| Packing quantity | 200 |
Compatibility
- For use on most Mono & Colour Laser Printers.
Handling
- Please follow the handling instructions supplied with this product as well as the Copier / Printer manufacturers manual.
- Avoid moisture and fingerprints.
Storage
- Shelf life: 1 year after delivery
- Store in the closed original packaging in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.
Downloads (PDF)
