STOPLITE JET P MATT

Suitable for Thermal Ink Jet printer

Suitable for Piezo Ink Jet printer

Suitable for pigment inks which offers improved light stability

Suitable for Latex printers

Suitable for Dye Ink

Instant dry coating

Improved water resistance

Good ink absorption

Brilliant high resolution colour prints

Non reflective

Weather proof prints when using pigmented inks

Good flatness, flexibly ductile

Print-outs with excellent water and wet smear resistance

Matt white Surface

Not compatible with oil and solvent based systems.

Useable on most large-format Ink Jet printers using Pigmented ink systems. Limited suitability with when using dye inks.

Between 15-30°C and 30-70% r.h.

A preconditioning period of 24 hours within the printing environment is recommended.

Avoid fingerprints on printing side.

Print side = matt white side

Printer Mode: photo quality, coated paper, o.e.

Lamination: cold laminates possible, Hot lamination: tests based on the application temperature might be necessary.

Outdside exposure (weathering):
up to 3 months without lamination possible, for longer periods lamination recommended.

Ink Load: approx. 260 - 300% (may vary according to ink system and RIP calibration).

Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

Unopened in original packaging storage time is minimum 1 year after shipment (under recommended storage conditions).