FOLEX DIGIPRINT-IG/WODS

Digital printing on durable substrates such as Folex Digiprint IG coated polyester films are an excellent and effective choice for a variety of applications.
Digiprint IG/WODS can be printed on front and back side.

High resolution (Download)

Cut sheets

Art. Number	Base/Nominal thickness (mm)	Format	Packing quantity
06657.180.84500	0.180	SRA3	200	Technical Datasheet
06658.250.84500	0.250	SRA3	200	Technical Datasheet

Good water resistance

Articlenr. 06657.180.84500

Characteristic

Good water resistance
Superb ink adhesion and image transfer
Duplex printing possible
Easy storage
Excellent dimensional stability
Tear resistant
Consistent performance
No limited shelf life
Suitable for short and long runs
Dedicated coating for HP Indigo Electro Ink

Finish

White opaque, gloss surface

Specifications

	Coating frontside	HP Indigo Electro Ink
	Print side	Special reactive coating for toner, printable both sides
	Base material	Polyester film
	Width (mm)	320
	Length (mm)	450
	Width (inch)	12.6
	Length (inch)	17.72
	Format	SRA3
	Base/Nominal thickness (mm)	0.180
	Base/Nominal thickness (mil)	7.2
	Packing quantity	200

Compatibility

Not compatible with dry toner Digital Presses. (See Folex Digiprint-XE and -NX series).
Suitable for Digital Presses from HP Indigo.

Handling

A preconditioning period of 24 hours within the printing environment is recommended.
No special handling required.
Please carefully follow the handling instructions supplied with this product as well as the press manufacturers manual.
Avoid fingerprints on printing side.

Storage

Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

FOLEX DIGIPRINT-IG/WODS

Cut sheets

Art. Number

Base/Nominalthickness (mm)

Format

Packingquantity