FOLEX DIGIPRINT-IG/PVK

Specially coated polyester film for Electro Ink with a Clear Transparent surface. The film is heat stabilized for good flatness properties and the coating offers excellent ink transfer & bonding for consistent image performance. Paper backing along the short side for smooth feedability.

High resolution (Download)

Cut sheets

Art. Number	Base/Nominal thickness (mm)	Format	Packing quantity (sheets)
06835.100.84500	0.100	SRA3	200	Technical Datasheet
06836.130.84500	0.130	SRA3	200	Technical Datasheet
06837.180.84500	0.180	SRA3	200	Technical Datasheet

Good water resistance

Paperbacked short side

Articlenr. 06835.100.84500

Characteristic

Good water resistance
Superb ink adhesion and image transfer
Easy storage
Excellent dimensional stability
Officially approved by HP Indigo test centre
Tear resistant
Consistent performance
No limited shelf life
Suitable for short and long runs
Dedicated coating for HP Indigo Electro Ink

Finish

Clear transparent
Paperbacked short side

Specifications

	Coating frontside	HP Indigo Electro Ink
	Print side	Film side
	Back side	Paperbacked short side
	Base material	Polyester film
	Width (mm)	320
	Length (mm)	450
	Width (inch)	12.6
	Length (inch)	17.72
	Format	SRA3
	Base/Nominal thickness (mm)	0.100
	Base/Nominal thickness (mil)	4
	Total thickness (mm)	0.174
	Total thickness (mil)	6.96
	Packing quantity (sheets)	200

Compatibility

Not compatible with dry toner Digital Presses. (See Folex Digiprint-XE and -NX series).
Suitable for Digital Presses from HP Indigo.

Handling

A preconditioning period of 24 hours within the printing environment is recommended.
Avoid fingerprints on printing side.
No special handling required.
Please carefully follow the handling instructions supplied with this product as well as the press manufacturers manual.

Storage

Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%.

FOLEX DIGIPRINT-IG/PVK

Cut sheets

Art. Number

Base/Nominalthickness (mm)

Format

Packingquantity (sheets)