A top coated clear static cling film for high resolution photographic posters, mock ups, signage, decals, point of sale displays, signs and labels. A soft back layer clings without any adhesive to clean smooth surfaces like glass, plexi-glass, polished metal or furniture. This film can be repositioned without leaving any adhesive residue. It gives excellent flatness and colour contrast reproduction even when using high levels of ink, reducing the possibility of material distortion. The film offers excellent handling, tough dimensional stability and is tear resistant. Images dry quickly.
Articlenr. 20789.310.38900
Characteristic |
Suitable for Thermal Ink Jet printer Suitable for Piezo Ink Jet printer Suitable for Dye Ink Fast dry coating Can be repositioned without permanently bonding to surfaces Good flatness Clings to smooth surfaces like glass, plexi etc. High resolution Tear resistant No bleeding
|
|---|
Finish |
|
|---|
Specifications |  | Coating frontside | For Ink Jet |
|---|
| Print side | Glossy side |
|---|
| Back side | Release liner |
|---|
| Base material | Polyester film |
|---|
| Width (mm) | 914 |
|---|
| Length (m) | 15 |
|---|
| Width (inch) | 36 |
|---|
| Length (ft) | 49.22 |
|---|
| Base/Nominal thickness (mm) | 0.310 |
|---|
| Base/Nominal thickness (mil) | 12.4 |
|---|
| Packing quantity | 1 |
|---|
|
|---|
Compatibility |
|
|---|
Handling |
Between 15-30°C and 30-70% r.h. A preconditioning period of 24 hours within the printing environment is recommended.
Avoid fingerprints on printing side.
|
|---|
Storage |
Store in a cool and dry place at a room temperature of 15 - 25°C and at a humidity of 30 - 60%. Unopened in original packaging storage time is minimum 1 year after shipment (under recommended storage conditions).
|
|---|
